Oscilloscope Specification
	Model		SDS6062	SDS7102	SDS8102	SDS8202	SDS8302/SDS9302
Vertical System	Vertical resolution (A/D)		8 bits Resolution (2 channels simultaneously )
	Vertical sensitivity		2mV/div～10V/div(at input)
	Displacement		±10div(5mV～10v)	±1V(2mV～100mV), ±10V(200mV～1V),±100V(2V～10V)
	Analog Bandwidth		60MHz	100MHz		200MHz	300MHz
	Single bandwidth		Full bandwidth
	low frequency		≥ 5Hz
	Rise time (at input, typical)		≤5.8ns	≤3.5ns		≤1.7ns	≤1.17ns
	DC gain accuracy		±3%
	DC accuracy(Average)		Average﹥16: ±(3% rdg + 0.05 div) for △V
Measurement	Cursor measurement		△V and △T between cursors
	Automatic measurement		Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time,Fall Time, DelayA→B , DelayA→B , +Width, -Width, +Duty, -Duty
	Waveform Math		＋, －, ×, / ,FFT
	Waveform storage		15 waveforms
	Lissajou’s figure	Bandwidth	Full bandwidth
		Phase difference	±3 degrees
	Communication interface		USB, support USB flash disk storage, SVGA
Trigger	Trigger level range		±6 divisions from screen center
	Trigger level accuracy		±0.3div
	Horizontal Trigger displacement		Pre-trigger: 655 div,Post-trigger: 10 div
	Trigger Holdoff range		100ns～10s
	Edge trigger		Rising、Falling
	Pulse Trigger	Trigger condition	Positive pulse：＞、＜、＝ negative pulse：＞、＜、＝
		Pulse width range	24ns～10s
	Video Trigger		NTSC、PAL、SECAM
	Slope Trigger	Trigger condition	Positive pulse：＞、＜、＝ negative pulse：＞、＜、＝
		Time setting	24ns～10s
	Alternate Trigger		Edge, Pulse, Video, Slope
Waveform	Waveform quantity		1～1000
record	Interval time		1ms～1000s
	Display		8" color LCD,TFT display,800x600 pixels,65535 colors
	Power Supply		100～240VAC RMS, 50/60Hz, CAT II
	Power consumption		< 18W
	Dimension Weight		340mm(L)×155mm(H)×70mm(W) 1.8kg (without battery)

Download User Manual