Model	PDS5022T
Bandwidth	25MHz
Sample Rate (Real Time)	10MSa/s
Horizontal Scale (S/div)	5ns/div~100s/div, step by 1~2.5~5
Rise time (at input, typical)	<= 14ns
Channels	Dual channels + external trigger
Display	8 inch color LCD, TFT screen, 640x480 pixels
Input impedance	1Mohm+-2% in parallel with 20pF+-5pF
Isolation between channels	50Hz (100:1), 10MHz (25:1)
Max. input voltage	300V (DC+AC PK-PK, 1Mohm input impedance, probe attenuation 10:1)
DC gain accuracy	+-5%
DC accuracy (Average)	16:+-(5% reading+0.05div)for deltaV
Probe attenuation factor	1X, 10X, 100X, 1000X
LF respond(AC, -3dB)	>= 5Hz (at input)
Record length	5K points on each channel
Sampling rate/relay time accuracy	+-100ppm
Interpolation	(sin x)/x
Input Coupling	DC, AC, GND
Vertical resolution (A/D)	8 bit (2 channels simultaneously)
Vertical sensitivity	5mV/div~5V/div (at input)
Trigger type	Edge, Video
Trigger mode	Auto, Normal, Single
Trigger level	+-6 divisions from screen center
Acquisition modes	Sample, Peak Detect and Average
Line/field frequency (Video)	Support NTSC, PAL and SECAM
Cursor measurement	deltaV and deltaT between cursors
Automatic measurement	Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A->B ascending, Delay A->B descending
Waveform Math	FFT
Waveform storage	4 waveforms
Lissajou figure	bandwidth=25MHz, phase difference=+-3degrees
Communication interface	USB
Power Supply	100V-240V AC, 50/60Hz, CAT II
Power consumption	<=15W
Fuse	2A, T class, 250V

Battery not included